George L's Cable

Instructions for Assembling Cable & Plugs

Straight Plugs Assembly DO NOT STRIP CABLE. Cut with a sharp instrument. Make it straight and clean. Back set screw out, far enough to allow cable to pass. Put plug on cable and push plug on to the needle. This is your hot connection. Tighten set screw down to touch the cable. Then tighten the screw 1 1/2 - 2 rotations. This is the ground connection. Right Angle Plugs Assembly DO NOT STRIP CABLE. Cut with a sharp instrument. Make it straight and clean. Remove cap from right angle plug Push cable onto the needle. DO NOT FORCE AND HOLD CABLE WITH YOUR THUMB. Bend cable enough to start screwing the cap back on. Let the twisting of the cap bring the cable down. Screw cap down completely to create the ground.

For pricing and further information about George L's Cable, please call (413) 283-5592 Monday through Friday, 11 a.m. - 5 p.m. or email Sales@TPNgear.com for more information or to order.